Oce VarioPrint 5000 Operating Manual Download Page 156

Page: 156 / 360

5.9.3.2 Replacing the Developer Station on the Trolley

146

A29246-X17-X-4-7680 / do501.fm

Press down the lock on the elevating
platform and push the tray with the
developer station you have just
removed onto the storage surface.

Drag the tray containing the developer
station you want to insert onto the
trolley’s guide rails, across the locking
pins to the stop point.

Only for installing the lower developer
station:
• Push foot pedal down, and

simultaneously, using the handle,
push the elevating platformfully
down.

Proceed as follows:

Summary of Contents for VarioPrint 5000









































































































































































































































































































































































Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands

Oce VarioPrint 5000, Operating Manual

Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands