Oce VarioPrint 5000 Operating Manual Download Page 238

Page: 238 / 360

7.3.1 Replacing or turning the cleaning blade (cleaning)

228

A29246-X17-X-4-7680 / do701.fm

Lift up the handle and pull the cleaning
station slowly and evenly out of the
system.

Vacuum-clean the cleaning station.
Take care not to touch the sealing
blade.

Important

The following action can soil hands and clothing.

Wear the gloves provided in the package.

Press the clamp outwards away from
the cleaning station and swing down
the guard plate.

Proceed as follows:

Summary of Contents for VarioPrint 5000









































































































































































































































































































































































Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands

Oce VarioPrint 5000, Operating Manual

Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands