Oce VarioPrint 5000 Operating Manual Download Page 90

Page: 90 / 360

4.3.4.3 Calling up and operating the Format wizard.

A29246-X17-X-4-7680 / do405.fm

4.3.4.3 Calling up and operating the Format wizard.

Use the Format wizard to set up a new paper format. The Format wizard only has one
menu.

Select a format from the table and click on

Alternative:

If you want to create a new format for the newly defined paper:

Press .
Enter the corresponding formats in the Format wizard and apply, (

see section 4.3.4.3

Calling up and operating the Format wizard., page 80)

You will return to the Paper wizard.

Follow the instructions in the subsequent menus.

Click on

in the final menu.

Note

Existing formats cannot be changed, regardless of whether they are predefined or
user-defined.

Proceed as follows:

On the operator panel, select the <VarioPrint> <Wizard> menu.

Select the "Format wizard" button in the menu display.

Press .

Enter a new name in the "Format name" entry field.

Set format attributes.

Proceed as follows:

Summary of Contents for VarioPrint 5000









































































































































































































































































































































































Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands

Oce VarioPrint 5000, Operating Manual

Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands