Oce VarioPrint 5000 Operating Manual Download Page 269

Page: 269 / 360

7.3.7 Turning or replacing the cleaning blade (transfer)

A29246-X17-X-4-7680 / do701.fm

259

Rotate the knob to the left until it
engages. Take the transfer station by
its handle and pull it towards you
slowly and evenly.

Release transport belt unit and raise
up until it engages.

Caution

The transport belt, cleaning blade, sealing blade and the other cover elements may
be damaged by the vacuum cleaner nozzle.

Do not touch these parts when vacuuming.

Proceed as follows:

Summary of Contents for VarioPrint 5000









































































































































































































































































































































































Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands

Oce VarioPrint 5000, Operating Manual

Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands