Oce VarioLink 9522, User Manual

Page: 441 / 532

Output Setting 11
VarioLink 9522 11-7
2
Note
A machine with finisher installed is set to output to the primary (main) tray
in Sort mode by default. Setting copy conditions limited to use the sec-
ondary (sub) tray or folding mode tray (FS-611 only) automatically switch-
es the tray selection.
Binding direction, output face, and output order settings are also availa-
ble.
2
Reminder
If large size paper (e.g. 11” × 17”
w
or A3
w
) delivered to the primary
(main) tray shows excessive curl, perform the setting described below.
(For Finisher FS-611 only)
(1) Take out the paper guide from the guide holder which is located on
the rear side of Finisher FS-611, then install it to the primary (main) tray.
(2) When copying job is completed, remove the paper guide from the pri-
mary (main) tray, and return it to its original position.