Oce VarioLink 9522, User Manual

Page: 197 / 532

Troubleshooting 5
VarioLink 9522 5-59
2
Press [Start] on the control panel.
– The machine starts scanning for the reloaded original to complete
the job.
2
Note
If the job settings include Booklet, the [Stop Scan] key will not appear.
2
Reminder
The original to be reloaded should be less in page count than the first
loaded, in order to prevent another memory overflow.
Remedy 2: Memory overflow in reserve job
When memory overflow occurs while scanning the reserve job, the machine
immediately stops and displays one of the following popup menus.
1
Take either of the following actions.
– To delete all the scanned data and discontinue the reserve job,
touch [Stop Job].
– To give up further scanning for the reserve job but print out all the
data already scanned into memory, touch [Stop Scan].
– To print out all the data already scanned for the reserve job, and
continue scanning as the current job gradually enables memory for
new data, touch [Continue].
– When selecting [Stop Scan] or [Continue], check the output sheets
and then reload the original to continue the job.