Oce VarioLink 9522, User Manual

Page: 294 / 532

9 Basic Job Settings
9-48 VarioLink 9522
– To specify a desired custom size:
(1) Touch [Size Setting], then touch [Custom].
(2) Select the lengthwise/widthwise dimension key to highlight it,
then use [
+
], [
,
], or touch screen keypad to enter the desired spe-
cial size.
Entered size should fall within:
(1) 7.17" - 12.36" (182-314 mm)/ (2) 5.51" - 17.52" (140-445 mm)
(trays 1 to 3)
(1) 3.94" - 12.36" (100-314 mm)/ (2) 5.51" - 18.11" (140-460 mm)
(bypass tray)
(1) 9.84" - 12.36" (250-314 mm)/ (2) 6.93" - 9.02" (176-229 mm)
(tray 4: LU-407)
(1) 7.68" - 12.36" (195-314 mm)/ (2) 7.99" - 18.11" (203-460 mm)
(tray 4: LU-408)
(3) Touch [Lead Edge], [Rear Edge], or [Center] to specify the de-
sired image position.
(4) To recall a custom size previously registered, touch [Size Recall].
Use [
+
]/[
,
] to scroll to the desired No. key, touch the key to high-
light it, then touch [OK].
(5) Touch [OK] to complete the setting and return to the Paper Set-
ting Screen.
– To select a desired wide size:
(1) Touch [Size Setting], then touch [Wide Paper].
(2) Select the desired wide size key to highlight it.
(3) Touch [Lead Edge], [Rear Edge], or [Center] to specify the de-
sired image position.