Oce TDS860, User Manual

Page: 67 / 330

Using the Océ TDS800 scanner to copy 67
Account logic
For accounting purposes, the system is able to log job information for each job.
The job identification attributes and the number of print jobs are logged in the
account file. For more information about account logic, see chapter 11 on
page 219.
Note:
The account settings are only available if the accounting option is
enabled in the system configuration.
[24] Accounting function
▼
Select accounting
1
Open the ‘Scanner’ card in the ‘Original’ section.
2
Select ‘Account id’ or ‘User id’ with the section key.
3
Set the needed ‘Account id’ or ‘User id’ with the ‘Arrow’ keys.
Using the manual feed for copy jobs
If you want to copy a job on a media type or size that is not available on one of
the media rolls, it can be convenient to manually feed cut sheets instead of
switching media rolls. The manual feed is a special slot just above the roll
drawers on the print engine. You can insert pre-cut copy material into this slot,
one sheet at a time.
Note:
Only use media as specified in ‘’ on page 301.