Oce TDS860, User Manual

Page: 48 / 330

48 Océ TDS860 User Manual
1
The exposure control
2
The display
3
The Section keys
4
The Arrow keys
5
The Media selection keys
6
The Manual feed key
7
The Auto roll key
8
The Correction key
9
The Stop key
10
The Job interrupt key
11
The Numeric keys
12
The Function keys
13
The numeric display
14
The Start key
Exposure control
The exposure control is located on the left side of the
operator panel. The scale displays the current exposure rate. Control the
exposure with the keys. Push the ‘down’ button to make the output darker. Push
the ‘up’ button to make the output lighter.
The Media selection keys
There are 6 Media selection keys, one for each roll.
Press the Media selection key to select the roll with the required format and
media type.
The Manual feed key
If you want to copy on a material type or size that is not
available in one of the roll compartments, press the manual feed key. The key
is located on the right section of the operator panel.
The Auto roll key
If you select auto roll, the Océ TDS860 will try to use a roll
format that matches the original size. After inserting the original, the roll that
is used is indicated on the operator panel.
When auto roll is selected, the Océ TDS860 will look for a matching roll of the
‘Standard’ copy material. If such a roll is not found, it will try to find a
matching roll of another type of material. The Key Operator can define the
‘Standard’ copy material.
When automatic zoom is selected on the display of the operator panel, together
with auto roll, the size of the matching roll does not necessarily have to be the
same as the size of the original.