Oce CS7075, User Manual

Page: 95 / 182

Edge-to-Edge Printing 3-39
Printer Setup
◆
The operator applies colored masking tape to the platen
where the right and left edges of the media will feed, to pre-
vent overprinting onto the platen.
◆
The operator sets the head height over the media.
◆
The operator configures the following options on the printer
control panel:
◆
Menu > Printer Settings > Margin Settings > Left &
Right Margin:
0 inches, Overprint Distance: 0.25 inches
◆
Menu > Printer Settings > Margin Settings > Leading
Margin:
0 inches
◆
Menu > Printer Settings > Margin Settings > Trailing
Margin:
6.5 inches
◆
Menu > Printer Settings > Print Position: Center
◆
Menu > Printer Settings > Media Measure Type:
Maximal
◆
Media length (entered during Load Media): 102.5
inches = 96.0 inch media 6.5 inch trailer
Fig. 3-21. Edge-to-edge printing terminology
Trailing edge
Trailer
Nominal print area
Left overprint
Right overprint
Leading edge
Media feed direction