Oce CS7075, User Manual

Page: 91 / 182

Edge-to-Edge Printing 3-35
Edge-to-Edge Printing
The printer can print up to or past the edges of rigid media. This
provides the look of a “full-bleed” print without trimming the
media. For best results, follow these guidelines.
Tip
Océ has developed an extensive set of tips and tech-
niques for printing on rigid media, including edge-
to-edge and double-sided printing. Contact: Océ
Display Graphics Systems Inc., 13231 Delf Place, Suite
501, Richmond, BC V6V 2C3, Canada, Telephone: +1
604 273 7730, Fax: +1 604 273 2775,
http://www.oce.com.
Document, Application,
and RIP Settings
To ensure that the printer will print past the edges of the media,
design or enlarge the job slightly larger than the media. For
example, if the media is 32 inches wide, set an Overprint dis-
tance of 0.125 inches (see
Menu > Printer Settings > Margin Set-
tings ) and size the document to 32.25 inches wide.
◆
For images with a special detail at the edge of the page,
such as a border, make the border line thicker than usual to
extend past the edges of the page.
Fig. 3-17. Laying out a full-bleed document (shown with bleeds
off three sides)
Media edge