Oce CS231, Operation Manual

Page: 543 / 594

CS240/CS231 13-51
Utility mode 13
5
Touch [4 Tri-Fold Position Adjustment].
The Tri-Fold Position Adjustment screen appears.
6
Touch the button for the paper size to be adjusted.
7
Check the folding positions in the sample copy.
– If the folding position is too far on the right side of the paper, touch [+] under "Adjust Value" to
increase the adjustment (between 0.1 mm and 12.7 mm).
– Each time [+] or [-] is touched, the value is increased or
decreased by one increment.
– If the folding position is too far on the left side of the paper,
touch [-] under "Adjust Value" to increase the adjustment
(between -0.1 mm and -12.7 mm).
8
Touch [OK].
– To cancel the setting and select the default, press the [Reset] key.
The folding positions are adjusted.
If no adjustment of the folding positions were necessary in step 7, this completes the procedure.
9
Use the "Tri-Fold" setting to print another sample copy.
10
Check the print result.
– Check that the folding positions were adjusted.
– If more adjustment is necessary, repeat steps 6 through 9.