Oce CS231, Operation Manual

Page: 178 / 594

4 Basic copy operations
4-80 CS240/CS231
4.14 Scanning the next document to be copied while a copy job is being
printed (next job reservation)
The settings for the next copy job can be specified and the document can be scanned while a copy job is
being printed so that it can be printed once the current copy job is finished.
0 Up to 61 copy jobs, including the current copy job, can be reserved.
0 A copy job can be reserved after scanning of the loaded document is finished. The next job cannot be
reserved while a document is being scanned.
0 To delete a reserved copy job, touch [Job List] in the left panel, and then touch [Job Details]. For details,
refer to "Deleting a job" on page 12-8.
1
When the message "Ready to accept another job." appears while the current job is being printed, a
document can be loaded, and copy settings can be specified for the next copy job.
– For details on positioning the document, refer to "Feeding the document" on page 4-8.
– If the "Copy Operating Screen" parameter in Utility mode is set to "Yes", touch [Next Copy Job]
while printing to display the Basic screen.
– For details on specifying the screen that appears while printing, refer to "Custom display settings"
on page 13-17.
2
Press the [Start] key.
3
After the current copy job is finished, the next copy job begins.