Oce CPS800, User Manual

Page: 40 / 174

40 Chapter 1 Introduction
Turn on and off the Océ CPS800®
Turn on and off the Océ CPS800
®
Introduction
The Océ CPS800
®
has three switches to turn on and off the Océ CPS800
®
.
■
The power switch
The power switch turns on and off the mains power supply to the Océ CPS800
®
.
You can find the power switch at the rear on the left-hand side of the Océ
CPS800
®
. Only turn off the Océ CPS800
®
with the power switch if the system
was properly shut down with the ON/OFF button .
■
The key switch
The key switch is a safety key. The operator can use the key switch to prevent
undesirable use. It prevents unauthorized use of the ON/OFF switch.
■
The ON/OFF button with LED .
The ON/OFF button turns on and off the Océ CPS800
®
.
In addition you can also configure the Océ CPS800
®
to turn itself on or off
automatically. This function is only an option if the power switch is set to '1'.
Note:
The power switch must only be used in case of an emergency or when the
system is in power mode 'off'.
Before you begin
Make sure that the Océ CPS800
®
is connected to the mains power supply.
How to turn the Océ CPS800
®
on
1.
The power switch has two icons. Press the icon '1' to turn the Océ CPS800
®
on.
2.
Press the ON/OFF button . The color of the LED in the ON/OFF button
changes to green. When the system starts, the LED on the operator panel blinks
green.
The LED on the operator panel goes off.
When the system is warming up, progress information is displayed in the system
monitor by means of a progress bar and an indication of the remaining time.