Oce CPS800, User Manual

Page: 156 / 174

156 Chapter 9 Problem Solving
Problem Solving
Problem Solving
Introduction
The table below lists some conditions that can occur during operation of the Océ
CPS800
®
.
You can resolve these problems without a service call.
Problem Solving Table
[69]
[69] Problem Solving Table (1 – 2)
Problem/message Solution
“First set ready.
Please check the
result.“ You have selected the option to check the first set. When the first set is
completed, you can check the result.
If the result is satisfying, you can Approve or Reject the job (Approve to
continue the job).
“Import busy.
Cannot export.“ The job is sent to the queue, but not yet downloaded completely.
Wait a few seconds, the job can be started when the download is ready.
Job in the queue
displays an error
.
A run-time contradiction occurred (see 'How to handle contradictions on
the Océ CPS800
®
.' in the Job manual).
Job in the queue
displays a warning
.
A start contradiction occurred (see 'How to handle contradictions on the
Océ CPS800
®
.' in the Job manual).
“Job on hold.“ To print this job, open the job queue and release the job.
“Not enough
memory for test
chart generation.“ Before the setting 'KOS adjustments' is activated, all the jobs in the job
queue must be removed. Avoid interference from automatic print jobs
sent from the controller. Select the 'Suspend printing' setting on the
controller.
Operator panel
light is dimmed. The printer is in low power mode (see 'The power modes of the Océ
CPS800
®
' in the Job manual).
Operator panel
light is off. The printer is in sleep mode (see 'The power modes of the Océ CPS800
®
'
in the Job manual).
Out of toner. Add toner (see 'Add the toner' in the Configuration and maintenance
manual).