Oce CPS800, User Manual

Page: 101 / 174

101
Actions in the Job Queue
The job queue manager
Before you perform an action in the job queue, you must select a job. Use the
arrow-up key or arrow-down key
to select a job.
[40]
[40] Actions in the job queue
[44]
[44] Possible actions in the job queue (1 – 2)
Action Function
View job settings
■
Select a job in the job queue.
■
Press the round selection key to open the job. The
settings of the job appear. Press the Selection key
again to close the view.
'Approve' This option is enabled when you select a job that will stop
because of 'Check first set' selection. If you press the key
for 'Approve', the job will continue after the first set is
ready.
Note:
You can also 'Approve' a waiting job in
the job queue. This indicates that this job can
be approved before the job starts.