Oce CPS800, User Manual

Page: 38 / 174

38 Chapter 1 Introduction
The power modes of the Océ CPS800®
Machine off mode
The electrical power connection to the Océ CPS800
®
is interrupted by the power
switch .
Off mode
The Océ CPS800
®
has electrical power. This condition is indicated by the amber
color of the ON/OFF button . You must press this button to switch the system on.
The initializing process begins. After some time, the operator panel displays the
basic settings and the Océ CPS800
®
is switched to stand-by mode.
Sleep mode
The Océ CPS800
®
turns into the sleep mode when the Océ CPS800
®
is not used for
some time. The settings of the ECO timer indicate the delay. The default value is 60
minutes. The key operator can change this value (see the configuration and
maintenance manual).
If the Océ CPS800
®
is in the sleep mode, the screen of the operator panel is off. The
Océ CPS800
®
switches back to Stand-by when you press the ON/OFF switch, or
when the controller sends an automatic print job (only if the image processing unit
is still on).
Note: You can not put the Océ CPS800
®
into the sleep mode manually.
Low power mode
The Océ CPS800
®
turns into the low power mode when the Océ CPS800
®
is not used
for some time. The settings of the ECO timer indicate the delay. The default value is
15 minutes. The key operator can change this value (see the configuration and
maintenance manual).
The Océ CPS800
®
switches back to stand-by when you press a key on the operator
panel, or when the controller sends an automatic print job (only if the image
processing unit is still on).
Note: You can not put the Océ CPS800
®
into the low power mode manually.
Stand-by mode
The Océ CPS800
®
is ready to accept and process the print jobs.