Oce CPS800, User Manual

Page: 31 / 174

31
The Keys on the Operator Panel
[12]
[12] The Keys on the Operator Panel (1 – 2)
Key Function
1 Start key Start a job.
2 Correction key The function can be one of the following.
■
Correct the settings
■
Delete subsets.
■
Delete jobs.
3 Stop key Stop a print job.
Note:
Press one time to stop the job on
the set border and press twice to stop
the job on the page border.
4 Set-build key Combine different subsets to one single document.
5 Help key Access the Help function.
6 Numeric keys Set the number of prints, enter Pin codes, account
ID.
7 Function-related
keys
The function depends on the screen content. The
function can be one of the following.
■
Access the templates.
■
Define the settings.
■
Access KOS and KOM (key operator only).
8 Arrow-up and
arrow-down keys Scroll through the job queue.
9 Selection key Select and open a job in the job queue.
10 Job queue key Toggle between the extended and collapsed job
queue view to manage the jobs.
11 Function-related key The function depends on the screen content. The
function can be one of the following.
■
Open and close the 'System manager' .
■
View the settings for 'Original'.
■
Quit KOS (key operator only).
■
Quit KOM (key operator only).
12 Function-related key The function depends on the screen. The function
can be one of the following.
■
Open and close the 'Paper manager' .
■
Change the settings for 'Print'.
■
Start KOM (key operator only).