Oce COLOR SYSTEM 110 Operator'S Manual Download

Page: 172 / 392

7-10

Advanced

Mode

Registered Color Selection

Designating Colors for Use

Press the [Registered Color] key.

Press the key for the color to be
selected from the registered
colors.

Press the [OK] key.

Press the [Done] key.

The display returns to the Sp. Feature screen, and the
[Color Creation] key is highlighted.
The copier is now ready to make copies.

❚

A key with a registered color has
a small black square (

■

)

displayed on the lower right.

❚

Press the [+] or [-] key to make
fine adjustment to the color if
necessary.

Summary of Contents for COLOR SYSTEM 110









































































































































































































































































































































































































Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands

Oce COLOR SYSTEM 110, Operator'S Manual

Search results

Summary of Contents for COLOR SYSTEM 110

Reviews:

Related manuals for COLOR SYSTEM 110

Brands by name

Popular brands