Oce 3275, User Manual

Page: 119 / 340

Output Modes 7-5
Output Modes
Non-Sort Mode Using Primary (Main) Tray
The Non-sort mode simply means that the offset-stacker finisher modes are not
selected. Copies will be stacked upon exit without being offset by sorted sets.
With the Primary (main) tray initially selected on the Finisher Mode Selection Screen,
Finisher / Finisher-Binder outputs the printed sheets FACE DOWN in the proper order.
❒
Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
❒
Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
3,000 sheets 8.5"x11", 8.5"x11"R
1,500 sheets 11"x17", 8.5"x14"
1 Touch
SORT
on the Basic Screen to deselect it, if highlighted.
2 Enter the desired print quantity.
3 Position original(s) in the document feeder or on the platen glass, and make copying
selections, as required.
4 Press [
START
] to begin copying in Non-sort mode.
Copies will exit face down, with the page heading toward the front of the copier.
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets while
the paper is exiting; otherwise mishandled paper will occur.
Basic Screen
1
2
3
1
2
3