Oce 3275, User Manual

Page: 134 / 340

7-20 Output Modes
Output Modes
Manual Stapling
The Manual Stapling function is available only with the Cover Sheet Feeder option ()
installed on the Finisher / Finisher-Folder. To use this convenient function, simply place a
set of paper to be stapled into the cover sheet feeder of the finisher, select the desired
staple mode from the manual stapling operation panel located on the top of the finisher,
then press the Staple Start/Stop button. The stapled set will be delivered to the Booklet
tray or the Primary (main) tray according to the selected mode, as described below.
When selecting the Stapling & Folding, the machine with the Trimmer unit installed trims
the end of booklet automatically and delivers it to the Trimmer unit tray.
• Stapling & Folding (2 staples in the Folding): Booklet tray,
or Stapling & Folding and Trimming (2 staples in the F Trimming):
Trimmer unit tray
• 1 oblique staple: Primary (main) tray
• 2 parallel staples: Primary (main) tray
Specifications for Manual Stapling & Folding mode
❒
Paper size: 11"x17", 8.5"x14", 8.5"x11"R, A4, A4R (8.27"x11.69", 210mmx297mm)
❒
Paper weight: 16~24 lb (20 lb paper is recommended)
❒
Staple capacity: 16 sheets max. (20 lb paper)
15 sheets max. (20 lb paper with a thick paper cover)
❒
Output tray: Booklet tray / Trimmer unit tray
Specifications for Manual Stapling 1 oblique staple and 2 parallel staples
❒
Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.69",
210mmx297mm)
❒
Paper weight: 16~24 lb (20 lb paper is recommended)
❒
Staple capacity: 50 sheets max. (20 lb paper)
❒
Output tray: Primary (main) tray
MAN
Stapling & Folding
Stapling & Folding
and Trimming
1 oblique staple
2 parallel staples
Manual stapling control panel