Oce 3275, User Manual

Page: 257 / 340

Key Operator Mode 14-9
Key Operator Mode
System Initial Setting [1] (continued)
IP Address Setting [3]
When using the Job Editor function, this setting is required to enable a PC to gain
access to this machine.
NOTE: Ask your network manager to perform this setting. Incorrect setting may cause a trouble in other
network systems.
❒
Setting options: IP address; Subnetmask; Gateway addess, Line speed
System Initial Setting Menu Screen IP Address Setting Screen
1 Press [
HELP
] to display the Help Screen, then touch
Key Operator Mode
.
Enter a 4-digit key operator password, then touch
OK
to display the Key Operator
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch
[1] System initial setting
to display the System Initial Setting Menu Screen,
then touch
[3] IP address setting
to display the IP Address Setting Screen.
3 Make the required setting. When customizing the line speed, touch
Line speed setting
to display the Line Speed Setting Screen. Touch the desired key, then touch
OK
to
restore the IP Adress Setting Screen.
4 Touch
OK
to complete the setting and return to the System Initial Setting Menu Screen.
5 If no further changes are required, proceed to step 7.
6 If other system initial setting changes are required, touch the key.
7 Touch
PREVIOUS SCREEN
to restore the Key Operator Mode Screen.
8 Touch
PREVIOUS SCREEN
to restore the Basic Screen to perform copying operations.
Line Speed Setting Screen