Oce 3275 User Manual Download Page 105

Page: 105 / 340

Basic Operations 6-33

Basic Operations

Basic Screen

Rotation (continued)

To Release Automatic Rotation

The copier is initially set to activate the Rotation function automatically.

To release automatic Rotation:

Touch

ROTATION OFF

on the Basic Screen to highlight it. The Rotation icon will go out

and the Rotation function will be canceled.

NOTE: ROTATION OFF is initially set to activate/deactivate 90

Rotation only. If desired, key operator can

set ROTATION OFF to activate/deactivate 180

Rotation also. See p. 14-40 to p. 14-45.

To resume automatic Rotation:
Touch

ROTATION OFF

on the Basic Screen to deselect it. The Rotation icon will be

displayed and the Rotation function will be reactivated.

Summary of Contents for 3275





















































































































































































































































































































































Search results

Summary of Contents for 3275

Reviews:

Related manuals for 3275

Brands by name

Popular brands

Oce 3275, User Manual

Search results

Summary of Contents for 3275

Reviews:

Related manuals for 3275

Brands by name

Popular brands