Oce 3275, User Manual

Page: 51 / 340

Machine Information 3-13
Machine Information
Lead Edge Delete
When using the RADF, image deletion of a few millimeters will occur on the lead edge
for the purpose of controlling copy quality and copy reliability, unless deactivated by the
key operator. See p. 14-40 to p. 14-45.
Service Settings
The following functions can be provided by your Océ service representative, who is
authorized to change DIP switch settings. Contact your service representative if setting
change is required.
Finisher-Paper Capacity
In the default condition, the 3275 will produce unlimited sets. If required, service can set
the copier to stop copying when the number of copies exceeds specified capacity.
Key Operator Password
Service can set a 4-digit Key operator password to access the Key Operator Mode
Screen. After this setting, a Password Entry Screen will display and require entry of the
Key operator password to access the Key Operator Mode Screen.
ECM Master Key Code
Service can set an 8-digit ECM master key code to access the ECM Setting Menu
Screen. After this setting, the ECM Master Key Code Screen will be displayed and will
always require entry of the set ECM master key code to access the ECM Setting Menu
Screen.
Weekly Timer Master Key Code
Service can set a 4-digit Weekly timer master key code to access the Weekly Timer
Setting Menu Screen. After this setting, the Weekly Timer Master Key Code Screen will
be displayed and will always require entry of the set Weekly timer master key code to
access the Weekly Timer Setting Menu Screen.
Weekly Timer Key in Help Screen
Service can set the copier with weekly timer system to display the Weekly timer key on
the Help Screen to check and see the contents of Weekly timer settings.