Oce 3275, User Manual

Page: 130 / 340

7-16 Output Modes
Output Modes
Punching Mode
The Punching mode is available only when the Punching unit option is installed on the
Finisher / Finisher-Binder.
When the Punching mode is selected in combination with any of the Primary (Main) tray
output modes, each copied sheet is punched and output to the Primary tray according to
the selected output mode.
NOTE: Some staple positions previously selected may conflict with this function.
❒
Copy paper size: 11"x17", 8.5"x11" (20 lb paper recommended)
❒
Paper weight: 20 lb ~ 24 lb bond recommended
Thin paper; 16 lb ~ 19 lb
Thick paper; 25 lb ~ 45 lb
❒
Number of holes: 3 holes
❒
Hole diameter: 0.315"
±
0.020" (8 mm
±
0.5 mm)
❒
Hole pitch: 4.252"
±
0.020" (108 mm
±
0.5 mm)
❒
Incompatible Basic Copying Conditions: Output to Secondary (sub) tray, Rotation Sort,
Rotation Group, Folding/ Stapling & Folding/ Trimming mode
❒
Incompatible Special Originals: Mixed Original (8.5"x11"R, 5.5"x8.5" mixed), Non STD Size
❒
Incompatible Applications: Booklet, Transparency Interleave
Basic Screen
4.252"
(108mm)
Finisher Mode Selection Screen