Oce 1000C, Job Management Manual

Page: 165 / 206

8
8-5 Starting and shutting down the Océ 1000C
Restarting the Océ 1000C
Use the following procedure to restart the Océ 1000C, rather than using the power
button on the front of the Océ 1000C.
T
O RESTART THE
O
CÉ
1000C
1. Make sure the Océ 1000C is not receiving, processing, or printing a job.
Make sure that both the RIPping and Printing areas on FieryBar read Idle.
N
OTE
:
If a job from the Print queue is processing, it will continue processing and print
after the Océ 1000C is restarted. If a job sent to the Direct connection is processing, it
will not finish processing or printing.
2. Right-click FieryBar and choose Restart Fiery from the menu that appears.
A Warning dialog box appears.
3. Click OK to restart the Océ 1000C.
Allow the Océ 1000C to start up.
4. At the Logon to Windows prompt on the monitor, keep Administrator in the user name
field, enter Fiery.1 in the password field, and press Enter.
N
OTE
:
The default password is set to Fiery.1. For information on changing the
password, see the Configuration Guide .
5. Allow FieryBar to appear and reach Idle on the monitor.