OcÃ© cx2100 User Manual Download Page 18

Page: 18 / 255

General information

Status LED indications

The

Status

LED (light emitting diode) will flash and change color depending on the machine’s

status.

The LED indications shown in the table below are used in the illustrations in this chapter.

LED

LED Status

LED is off.

Green

Yellow

Red

LED is on.

Green

Yellow

Red

LED is blinking.

LED

Machine Status

Description

Sleep Mode

The power switch is off or the machine is in Sleep mode.

Green

Warming Up

The machine is warming up for printing.

Green

Ready

The machine is ready to print.

Yellow

Receiving Data

The machine is either receiving data from the computer,
processing data in memory, or printing data.

Yellow

Data Remaining in
Memory

Print data remains in the machine memory.

Red

Service error

Follow the steps below.

1. Turn off the power switch.

2. Wait a few seconds, and then turn it back on and try to print
again.

If you cannot clear the error and you see the same service call
indication after turning the machine back on, please call Océ
Technical Support.

Summary of Contents for cx2100































































































































































































































































Search results

Summary of Contents for cx2100

Reviews:

Related manuals for cx2100

Brands by name

Popular brands

OcÃ© cx2100, User Manual

Search results

Summary of Contents for cx2100

Reviews:

Related manuals for cx2100

Brands by name

Popular brands