User’s Guide Océ CS9160 printer
Chapter 4 : Handling the printer
74
AP-40790 – Rev 1.0 -4/03/2008,
4.4.3 Nozzle check
Used to check whether there are any head clogging, missing nozzles or misfiring nozzles.
Notes
•
If the nozzle check result indicates that the checked points are blurred or missing, clean the head.
See
Head cleaning.
Perform the nozzle check once again after the head has been cleaned.
Notes
•
For the printing procedure, refer to
“Performing a test print”
.
4.4.4 Mode Print
Used to confirm the following printing conditions:
•
mode
•
Effect
•
Pre heater set temperature
•
Fixer (Platen) heater set temperature
•
Drier heater set temperature
•
Adjustment
value
Notes
•
For the printing procedure, refer to “
Performing a test print”
.
