User’s Guide Océ CS9160 printer
Chapter 3 : Installing the Unit
44
AP-40790 – Rev 1.0 -4/03/2008,
3.8.2 Transporting the printer
Be sure to read and understand the safety warnings before handling the printer.
When transporting the printer, it is necessary to pack the printer as it was shipped, using the protective
materials and packing materials to protect the printer from vibration and shocks.
Notes
•
When transporting the printer, consult your Océ product representative.
(1) Pre- transport procedure
Step 1 :
Switch ON the printer.
Step 2 :
Verify that the printer is in Normal mode.
Step 3 :
Remove all ink cassettes.
Step 4 :
Switch OFF the printer.
•
Result: The operation panel displays "Transport Mode", and the printer starts the ink rejecting operation.
•
The ink rejecting operation takes about 2 minutes.
Step 5 :
Verify that the power light faints when the ink rejection operations has been finished.
Step 6 :
Remove the scroller or the optional winding system.
Step 7 :
Remove all cables.
Step 8 :
Attach the protective material (metal plate) to the head unit, and fix it with thumbscrews.
3
2
1
No. Name
1 Head
unit
2 Butterfly
screw
3
Head unit fastening material (metal plate)
Step 9 :
Open the right maintenance cover and the front cover
Step 10 :
Install the plastic bar while lifting the carriage.
Y rail
CR belt fixing
plate
Carriage fixing
shaft
