OBi1000 User Guide
Copyright Obihai Technology
77
The user can cancel the input operation by pressing the
back key. In many cases, the user can also press the OK
key to accept the current input.
Dial Dialog
This is a special input dialog for the user to dial a number; it has all the elements of a generic input box. There are
two flavors of dialing:
Off hook dialing: This is the normal kind where the user goes off hook or turns on the speakerphone first
before dialing the first digit. Dial tone will be played by the phone before the first digit is entered.
On hook dialing (a.k.a. pre-dialing): User dials the number first and then goes off hook, or turns on
speakerphone, headset, or presses one of the call keys or line keys to start the call.
The Dial Dialog itself looks the same in both cases. The audio speaker icon on the status bar will indicate whether
this is off-hook dialing or on-hook dialing
Figure 71: GUI showing a Dial Dialog during off-hook dialing, where the
speakerphone is being used
Notification/Warning Dialog
This dialog pops up to show the user a short notification message, as shown in the example below. The user can
press the
back key or the OK soft key to dismiss the dialog.
Figure 72: Display of a notification dialog
Confirmation Dialog
This dialog pops up to show the user a short message and request confirmation from the user before proceeding
with a certain operation. Here is an example that asks for confirmation before proceeding with a Factory Reset. The
