OBi1000 User Guide
Copyright Obihai Technology
28
Figure 19: GUI screen showing a Dial Dialog during off-hook dialing with the
handset. Note the handset icon in the status bar.
It is possible that the handset is not resting on the cradle while the phone is idle (i.e. with 0 calls). In such a case the
user may toggle the hook switch (the button the handset rests on in its cradle) to start the dial tone on the handset.
With the Speakerphone
Turing on the speakerphone by pressing the speakerphone key when the phone is idle has a similar effect as off-
hooking the phone (i.e. lifting the handset from its cradle) and also selects the speakerphone for use with the call.
The speakerphone key lights up green when it is turned on. When the phone returns to idle mode the speakerphone
will be turned off automatically.
With the Headset
Activating the headset by pressing the headset key when the phone is idle has similar effect as off-hooking the
phone and also selects the headset for the call.
The headset key lights up green when it is turned on. When the phone returns to idle mode the headset will be
turned off automatically.
There are three headset ports available on the OBi:
RJ9 Headset Port (OBi1032 and OBi1062 only)
3.5mm Headset Jack
Bluetooth Headset
When there is only one headset connected, the phone automatically selects that headset port when the user selects
to use headset for the call. When more than one headset is connected, the phone picks the preferred headset port
based on the setting of the
Preferred Headset Device
option in the Preferences app.
Figure 20: Preferred Headset Device
