Obihai OBi1000 Series User Manual Download

Page: 74 / 84

OBi1000 User Guide

Figure 65: Two calls with "Pack Calls On Display" enabled

With “Pack Calls On Display” disabled, the windows are stacked on top of each other, with only the highlighted call

shown in its entirety:

Figure 66: Two calls with "Pack Calls On Display" disabled

In both cases, there are two calls. The call with George is on hold, while the call with Bill is active and also
highlighted.

With “Pack Calls On Display” disabled, only the call

window with Bill is shown. If you press the

“Up”

navigation key, the call window with George will be highlighted and shown:

Figure 67: Two calls with "Pack Call On Display" disabled. First call is highlighted.

Screen Saver

With screen saver enabled, the phone will go into the screen saving mode when it idles. The delay from the point of
idleness being detected to the screen saver being activated is controlled by

“Screen Saver Delay”.

When the phone

is in screen saving mode, any key presses or an incoming call will wake up the phone, and one can choose to impose

Summary of Contents for OBi1000 Series





















































































Search results

Summary of Contents for OBi1000 Series

Reviews:

Related manuals for OBi1000 Series

Brands by name

Popular brands

Obihai OBi1000 Series, User Manual

Search results

Summary of Contents for OBi1000 Series

Reviews:

Related manuals for OBi1000 Series

Brands by name

Popular brands