The appliance does
not seal the vacuum
bag after the vacuum
process.
The appliance comprises a built-in sensor. The
appliance does not switch over to sealing, if the
necessary pressure has not been reached during the
vacuum process.
Check the sealing strip and remove any possible
impurities.
Check the gaskets and remove the lower one for
cleaning when needed. If they have been damaged,
they should be replaced.
The vacuum bag may leak. Check the bag by sealing
it with some air in it and immerse it in water. If the
bag emits bubbles, it is leaking. Seal the bag again or
use a new one.
Dirt or liquid in the bag opening can make it difficult
to seal the bag. Open the bag and wipe around the
opening before you put it horizontally on top of the
sealing element.
95
7944_KK_UVN_0215.indd 95
2018-02-09 08:48:48