How to change the teflon tape
If the teflon tape (5) of the heating element has been damaged or loosened, it
should be replaced by a new one (can be ordered at OBH Nordica 08-629 25
00).
Make sure that the appliance is unplugged and that the appliance is absolutely
cold. Open the lid by means of the handle and remove the damaged teflon
tape. Now carefully remove the protection strip from the new tape. Take care
that the tape does not stick to anything or sticks together. Hold the tape
in both ends and fasten one end a little to the left/right side of the heating
element and stretch the tape all over the element. Check for possible wrinkles
or air bubbles on the tape and make sure that it covers the entire element.
Storing:
• Store the appliance on an even surface out of the reach of children.
• Do
not
press the lid so it locks when storing in order to prevent deformation
of the gaskets of the appliance.
• Wind the cord into the cord winding device under the appliance.
Troubleshooting
Problem
Reason/solution
Nothing happens
when I try to vacuum
seal the bag.
Check that the switch has been plugged to a wall
outlet.
Check the cord for any damage.
Check that the vacuum bag is positioned correctly in
the appliance (see previous instructions).
94
7944_KK_UVN_0215.indd 94
2018-02-09 08:48:48