1505 Laperriere Ave Suite 368, Ottawa, ON K1Z 7T1 |
ph: +1 800-489-6146
Smart Heated Mug Kit 2.0
Model Number: TSHMKV2-23
IMPORTANT SAFEGUARDS
1.
Read all instructions
2.
Do not touch surface when hot
3.
To protect against electrical hazards, do not immerse cord, plugs or the appliance in water or any other liquid.
4.
Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the
appliance.
5.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
6.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance.
7.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
8.
The use of accessories or attachments not recommended by Tease may cause hazards.
9.
Extreme caution must be used when moving an appliance containing hot liquid.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or counter or touch hot surfaces.
12. Do not use appliance for other than its intended use & Do not leave unit unattended while in use.
SAVE THESE INSTRUCTIONS (HOUSEHOLD USE ONLY)
This appliance comes with a power supply block with polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in
any way. This appliance is attended for a standard 120 volt electrical outlet only.
HOW TO USE
This product is designed to keep hot beverages at the right drinking temperature (up to 55 degrees celsius/131 degrees fahrenheit). It is not intended to
reheat beverages.
1. Place the mug warmer on a level, heat and stain resistant surface.
2. Plug into the nearest 120 volt wall electrical outlet.
3. Simply set your mug included in kit, on the warming surface of the mug warmer. When the mug is centered, heating element will turn on as indicated by the light.
4. When mug is removed, warming pad will automatically turn off. Unplug mug warmer when not in use.
IMPORTANT NOTES:
• This appliance is not intended for use with plastic or Styrofoam cups.
• This appliance is not intended to heat a beverage, only to maintain a drinking temperature.
• This appliance will remain ‘On’ until the mug is removed
• The warmer will not work with most mugs, it is recommended you use mug within kit only
To avoid damaging the included mug, avoid pouring boiling water directly inside and ensure the mug is room temperature or warmed with a bit of
hot water first before use. Hand wash mug only.