11
EN
1568911, Edition 2019-04, Version 0
1
Versions, Scope of Delivery and Installation References
See “Figure 2: page 10”
1
Interface plate (Single / Duo) – pre-assembled
2
Intermediate ceiling – installed by the customer on site
1.4 Scope of delivery of the extension arm with motor arm,
Navigator Lift
™
150 Dual arm
The scope of delivery can vary depending on the individual order.
3
Canopy (Single / Duo) (Flat / High) (depending on the version)
Installation as described in Chapter 14 on Page 66
– 1 Single canopy Ø 600mm x 150mm, 1 canopy attachment 110mm high
– 1 Single canopy – 700mm x 700mm x 150mm high
– 1 Duo canopy (installation with intermediate ceiling) – 700mm x 700mm x 50mm
– 1 Duo canopy (installation with intermediate ceiling) – 700mm x 700mm x 150mm
– 1 canopy attachment – 700mm x 700mm x 120mm high
Canopy fixing elements
– 4 / 6 threaded bolts M10 x 360mm, 4 / 6 hexagonal nuts M10
– 4 / 6 metal screws, 4 / 6 cover screws and 1 sectional strip
5
Extension arm with motor arm and ceiling tube (pre-assembled)
Installation as described in Chapter 8 on Page 36
– 1 extension arm, 600, 800, 1000, or 1200mm long, with motor arm 150
Pre-assembled components
– 1 power supply cable
– Supply cables for electromagnetic brakes
– 1 signal cable for electromagnetic brakes (in protective tube)
– 4 earthing cables 4mm² (3 earthing cables for unassembled ceiling tube)
Pre-assembled or loose components
incl. in the scope of delivery
(see Chapter 15.5 on Page 76)
– 2 setscrews M16 – DIN EN ISO 4028,
– 4 ball stops Ø 12.7mm
– 2 voltage selection plugs for the selection of the 120V / 230V power supply
– 2 section end caps for extension arm
– 2 side panels, front right / left joint for motor arm
– 1 cover, front joint, for motor arm
– 2 cover straps, front joint, for motor arm
– 2 side panels, front right / left joint, for motor arm
– 1 cover, rear joint, for motor arm
– 2 cover straps, rear joint, for motor arm
Fixing elements of the extension arm
– 12 hexagonal nuts M16 and 6 spring rings, 12 flat washers external Ø 34mm and
12 plastic insulating discs, 6 threaded bolts M16 x 330mm
6
Extended ceiling tube
Pre-installation as described in Chapter 7 on Page 32
– 1 ceiling tube (length as specified in the order)
– 1 earthing cable, 4mm²
Loose components
incl. in the scope of delivery
– 1 socket wrench extension (for 500 and 700mm ceiling tube length only)
Fixing elements for
additional ceiling tube
– 8 Allen cylinder screws M10 x 25mm – 8.8 – DIN EN ISO 4762
– 8 lock washers S10
7
Console tube
Installation as described in Chapter 9 on Page 42
– 1 console tube (in order-specific length)
Pre-assembled components
– 1 earthing cable, 4mm²
Console tube fixing elements
– 8 Allen countersunk screws M10 x 18mm – 10.9 – DIN EN ISO 10642
Console tube fixing elements
mounted to the Navigator M6
– included in the scope of delivery of the Navigator M6
