Nuvo Navigator Lift 150 Dual, Installation Instructions Manual

Page: 5 / 96

5
EN
1568911, Edition 2019-04, Version 0
7 Pre-Assembly: Mounting an Extended Ceiling Tube 32
7.1 Components described in this chapter 32
7.2 Mounting an extended ceiling tube 33
7.2.1 Mounting a ceiling tube 33
7.2.2 Mounting the strain relieving mechanism in the ceiling tube 34
7.2.3 Subsequently mounting the earthing cable to the ceiling tube 35
8 Mounting the Ceiling Tube to the Threaded Bolts of the Interface Plate 36
8.1 Components described in this chapter 36
8.2 Mounting a ceiling tube 37
8.3 Aligning the motor arm / extension arm with the interface plate, Single 38
8.4 Aligning the motor arm / extension arm with the interface plate, Duo 40
9 Mounting the Console Tube to the Motor Arm 42
9.1 Components described in this chapter 42
9.2 Mounting the console tube to the motor arm 43
9.3 Positioning the Navigator M6 under the console tube 43
10 Mounting Optional Accessories 44
10.1 Mounting the Extension Arm Lighting (for Retrofit only) 44
10.2 Mounting the brake indicators (for retrofit only) 45
11 Mounting Cables 46
11.1 Versions 46
11.2 Safety instructions 46
11.3 Swinging out / retracting the electronic unit 47
11.3.1 Swinging out the electronic unit 47
11.3.2 Retracting the electronic unit 47
11.4 Connecting cables to the extension arm with motor arm Dual arm,
with Navigator M6 48
11.4.1 Routing the cables from the distributor board to the DC/DC converter 48
11.4.2 Routing the cables from the main board to the DC/DC converter
48
11.4.3 Connecting the motor and the end switch
of the height adjustment mechanism 48
11.4.4 Connecting the control cable of the brakes and
the height adjustment mechanism 48
11.4.5 Connecting the electromagnetic brakes 48
11.4.6 Mounting the power cable 48
11.5 Connecting optional accessories to the extension arm
with motor arm Dual arm, with Navigator M6 50
11.5.1 Connecting the optional brake indicators 50
11.5.2 Connecting an optional sound or lighting cable 50
11.5.3 Connecting the optional extension arm lighting 50
11.6 Connecting earthing cables to the extension arm with motor arm Dual arm,
with Navigator M6 52
11.7 Routing the supply cables and hoses through the extension arm
with motor arm Dual arm, with Navigator M6 52
11.8 Connecting the cables to the motor arm Single arm, with Navigator M6 54
11.8.1 Routing the cables from the main board to the DC/DC converter 54
11.8.2 Connecting the motor and the end switch
of the height adjustment mechanism 54
11.8.3 Connecting the control cable of the brakes
and the height adjustment mechanism 54
11.8.4 Connecting the electromagnetic brake 54
11.8.5 Mounting the power cable 54
11.9 Connecting the optional accessories to the motor arm Single arm,
with Navigator M6 56
11.9.1 Connecting an optional brake indicator 56
11.9.2 Connecting an optional sound or lighting cable 56