Nuvo Navigator Lift 150 Dual, Installation Instructions Manual

Page: 6 / 96

6
EN
1568911, Edition 2019-04, Version 0
11.10 Connecting the earthing cables to the motor arm Single arm,
with Navigator M6 58
11.11 Routing the supply cables and hoses through the motor arm Single arm,
with Navigator M6 58
12 Connecting the Supply Cables and Hoses 60
12.1 Safety Instructions 60
12.2 Installing gas supply hoses and exhaust air ducts 61
12.3 Connecting the earthing cables 62
12.4 Installing the voltage selection plug and connecting the power cables 62
12.4.1 Installing the voltage selection plug for the 120V / 230V power supply 62
12.4.2 Replacing the fuse
63
12.4.3 Connecting power cables 64
12.5 Checking the supply cables and hoses 64
13 Inspections 65
13.1 Gas inspection (only Navigator M6) 65
13.2 Mechanical collision test 65
14 Mounting the Canopy, Cover Caps and the Cover Panels 66
14.1 Mounting a Single / Duo canopy 66
14.1.1 Preparing the installation of the canopy 66
14.1.2 Mounting the canopy halves 66
14.2 Mounting the Single canopy 67
14.2.1 Preparing the installation of the canopy 67
14.2.2 Mounting the canopy halves 67
14.3 Mounting/dismantling the cover caps to/from the extension arm 68
14.3.1 Mounting the cover caps 68
14.3.2 Dismantling the cover caps 68
14.4 Mounting the cover plates to the motor arm 69
14.4.1 Inserting the rear cover plates 69
14.4.2 Mounting the front cover plates 69
14.5 Mounting the rear side panels to the motor arm 70
14.6 Mounting the lower, rear covers to the motor arm 70
14.7 Mounting the front side panels to the motor arm 71
14.8 Mounting the front upper cover to the motor arm 71
15 Adjustments 72
15.1 General safety instructions 72
15.2 Adjusting the mechanical brake for the Navigator M6 72
15.3 Adjusting the vertical lift on the motor arm 73
15.3.1 Functioning of the vertical lift 73
15.3.2 Opening the bottom rear cover 73
15.3.3 Adjusting the vertical lift 74
15.3.4 Shutting the bottom rear cover 74
15.4 Correcting the vertical alignment of the Navigator M6 75
15.4.1 Opening the bottom rear cover 75
15.4.2 Correcting the vertical alignment 75
15.4.3 Shutting the bottom rear cover 75
15.5 Condition of the swivel stop on the extension arm and the motor arm supplied 76
15.5.1 Extension arm and motor arm with pre-assembled swivel stop 76
15.5.2 Extension arm and motor arm without pre-assembled swivel stop 76
15.6 Adjusting the swivel stop on the extension arm and motor arm 77
15.6.1 Versions 77
15.6.2 Tool to be used 77
15.6.3 Mounting the swivel stop 78
15.6.4 Dismantling the swivel stop 79