NTT docomo FOMA N706i, Instruction Manual

Page: 85 / 519

83 Continued on next page
Phonebook
Checking the Phonebook
Storage Status
<No. of phonebook>
1 Phonebook list screen (P.79)
u
(FUNC) “No. of phonebook”
■
Phone (the phonebook stored on the
FOMA terminal)
Phonebook : Displays the number of entries
stored in the phonebook.
Number of stored data/1,000
(storage limit)
Secret : Displays the number of entries
stored as secret data. (This can
only be displayed in “Secret mode”
or “Secret data only mode”.)
Image : Displays the number of images
stored in the phonebook.
Number of stored data/100
(storage limit)
Chara-den : Displays the number of “Chara-
den” characters stored in the
phonebook.
Number of stored data/100
(storage limit)
■
UIM (the phonebook stored on the FOMA
card (UIM))
Phonebook : Displays the number of entries
stored in the phonebook.
Number of stored data/50 (storage
limit)
Setting Different FOMA
Terminal Actions for Each
Phone Number and Mail
Address
<Ring tone/Image>
You can set different ring tones or answer messages
for the Record message depending on groups, phone
numbers or e-mail address in the phonebook. This
function is useful when you want to distinguish the
caller only by the ring tone.
z
You cannot set this setting for “No Group” on the
FOMA terminal (Phone) or the phonebook or
groups on the FOMA card (UIM).
z
The Ring tone/Image functions are disabled when
the caller does not notify the caller ID. It is
recommended to set the “Caller ID Request”
service.
1 Phonebook detail screen (P.79)
u
(FUNC) “Ring tone/Image”
The “Ring tone/Image
screen” appears.
“ ★ ” appears next to the
selected function.
The available functions vary
depending on the item
selected in the phonebook detail screen.
■ To set this function for each group
Group setting screen (P.78)
u
(FUNC) “Ring tone/Image”
2 Select the item to distinguish
Select the item from “Voice call (recv.)/V.phone
(dial/recv.)/Mail (recv.)”.
• When “Mail (recv.)” is selected, this function is
applied not only i-mode mail but SMS.
3 Select any item:
“ ★ ” appears next to the selected function.
■
To release a selected function
Highlight the function with “
★
”
o
(Reset)
The function is released and the “ ★ ” disappears.
Ring tone
*1
……
Sets ring tones to distinguish the
caller of the phone or sender of mail.
“Changing the Ring Tone”
→
P.90
Image
*1*2
…… Sets images to distinguish the caller
of the phone. “Changing the Display” → P.96
Chara-den setup
*3
……
Selects Chara-den to be
displayed as the substitute image for videophone
calls.
Ring tone/Image