NTT docomo FOMA N706i, Instruction Manual

Page: 112 / 519

110
Sec
urity Settings
Security Codes Used on the
FOMA Terminal
To make the FOMA terminal more convenient and
secure, some functions require the security code. In
addition to the security code for various FOMA
terminal operations, you also have the Network
security code for accessing network services and the
i-mode password. Make use of the FOMA terminal
using an appropriate security code according to the
purpose.
■
Security Code
The security code is set to “0000” (4 zeros) at the
time of purchase. You can change the security code
by yourself. → P.111
When the security code screen
appears, enter the 4 to 8 digit
security code and press
d
(Set).
z
The entered security code is
displayed as “_” and the
numbers are not displayed.
z
When you enter a wrong security code or enter
nothing for about 15 seconds, a warning tone
sounds and a warning message appears.
■ Network Security Code
The network security code is a 4-digit number
required for using the DOCOMO e-site or various
network services. You can set any number at the time
of subscription but you can change it afterwards by
yourself.
If you have the “docomo ID/Password” for general PC
support site “My docomo”, you can change the
network security code from your PC.
You can also change it by yourself using i-mode, from
“ 各種手続き ” (Applications and Procedures) on the
DOCOMO e-site. (only in Japanese)
* For details of “My docomo” and “DOCOMO e-site”,
see the back of the back cover of this manual.
■ i-mode Password
The 4-digit “i-mode password” is required when
registering/unregistering My Menu, subscribing to/
unsubscribing from the message service or the pay
services of i-mode (There may be other passwords
set independently by the information service
providers).
The i-mode password is set to “0000” (4 zeros) at the
time of subscription. You can change the i-mode
password by yourself.
You can change the password using i-mode, by
selecting
p
“i Menu” “English” “Options”
“Change i-mode Password”.
■ PIN1 Code and PIN2 Code
You can set two security codes of PIN1 code and
PIN2 code for the FOMA card (UIM).
These security codes are set to “0000” (4 zeros) at
the time of subscription. You can change the PIN1/
PIN2 codes by yourself. → P.111
PIN1 code is a 4 to 8 digit number (code) you enter
each time you insert the FOMA card (UIM) to the
FOMA terminal or you turn on the FOMA terminal.
This code identifies you as the user and is designed
to prevent improper use of your FOMA card (UIM) by
others. When the PIN1 code entry set is set to “ON”,
entering the PIN1 code enables you to make and
receive calls and use the functions of the FOMA
terminal.
The PIN2 code is a 4 to 8 digit number that is used for
resetting the total call charges, using or requesting
the user certificates, etc.
* When you purchase a new FOMA terminal and
insert your current FOMA card (UIM), use the PIN1
and PIN2 codes you set to the current card.
When the PIN1 or PIN2 code entry
screen appears, enter the 4 to 8
digit PIN1/PIN2 code and press
d
(Set).
z
The entered PIN1/PIN2 code is
displayed as “_”.
z
If you enter a wrong PIN1/PIN2
code three times consecutively, the PIN1/PIN2
code is locked and cannot be used anymore. (The
remaining number of times for the entry appears on
the screen.) When you enter the correct PIN1/PIN2
code, the number of times for entry is reset to 3.
Notes on the security codes
z
Avoid using a readily predictable number such as
“birthday”, “part of the phone number”, “street
address number or room number”, “1111” and
“1234”. Make sure to make a note of the security
code you set in case you forget it.
z
Take great care not to disclose your security
code to others. If your security code is disclosed
to others and abused, NTT DOCOMO shall have
no liability for any damage due to any
unauthorized use of it.
z
DOCOMO by no means inquire your security
code.
z
If you forget any of your security codes, you must
bring your official identification providing that you
are the subscriber (such as a driver’s license),
the FOMA terminal, and the FOMA card (UIM)
with you to a DOCOMO shop.
For details, contact the inquiries number
provided on the back of this manual.
Ex. PIN1 code