NTT docomo FOMA N706i, Instruction Manual

Page: 167 / 519

165
i-mode/i-motion/i-Ch
annel
■ Notes on using FirstPass
• FirstPass is DOCOMO’s digital authentication
service. Using FirstPass enables the client
authentication in which the site authenticates the
FOMA terminal.
• FirstPass can be used either when the FOMA
terminal is directly connected to the Internet or
when it is connected via a PC. When the FOMA
terminal is connected to the Internet via a PC, the
FirstPass PC software included in the provided CD-
ROM for FOMA N706i
Ⅱ is required. For more
information, refer to the PDF-format
“FirstPassManual” contained in the
“FirstPassPCSoft” folder on the CD-ROM. (The
“FirstPassManual” is in Japanese only.)
To view the PDF-format “FirstPassManual”,
Adobe
® Reader® is required.
If this software is not installed on your PC, install
the Adobe
® Reader® in the provided CD-ROM to
view the file.
Refer to the “Adobe Reader ヘルプ ” (Help of the
Adobe Reader) for details on how to use it.
• When requesting a user certificate, carefully read
and agree to the “The usage regulation” of
FirstPass displayed on your screen before
proceeding with your request.
• To use a user certificate, you will need to enter your
PIN2 code (P.110). Take great care to prevent
unauthorized persons from using your FOMA card
(UIM) or PIN2 code since all the actions performed
subsequent to PIN2 code entry will be assumed to
have been performed by you.
• If your FOMA card (UIM) is lost or stolen, you can
have your user certificates invalidated at NTT
DOCOMO Information counter on the back cover of
this manual.
• NTT DOCOMO is not responsible for and accepts
no liability whatsoever regarding the sites or the
content provided by FirstPass-compliant sites. Any
disputes are to be resolved between the customer
and the FirstPass-compliant site.
• NTT DOCOMO and its authentication company
provide no guarantee regarding security or secrecy
in the use of FirstPass and SSL certificates. Such
certificates are used entirely at the discretion of the
user.
Changing the Certificate Host
You can set the host for downloading the user
certificate.
1
i
“SETTINGS” “Connection
setting” “Certificate host”
2 Highlight “<Not recorded>”
o
(Edit)
Enter your security code Select any
item:
Default URL
……
Sets the URL of the initial screen
for the host. You can enter up to 100 single-byte
characters.
Host number …… Sets the host number. You can
enter up to 99 single-byte characters.
3 Set the respective items
o
(Finish)
* There is normally no need to change this
setting.
N
z
To change a stored “User setting host”, use the same
procedure for storing.
z
To delete a stored “User setting host”, select “Delete”
from the function menu.