NTT docomo FOMA N706i, Instruction Manual

Page: 63 / 519

61 Continued on next page
V
o
ice/Videophone Ca
lls
It may not be possible to send all the data at
once to some recipients.
Using the Prefix Function
You can store the prefix numbers such as IDD prefix
code (WORLD CALL) and 186/184 for notifying/
withholding your caller ID beforehand and add these
prefix numbers when you make calls.
Storing the prefix numbers
<Prefix setting>
z
You can store up to 7 prefix numbers.
z
You can enter numbers from 0 to 9 and the #,
*
and + symbols.
1
i
“SETTINGS” “Dialing” “Prefix
setting”
The “Prefix setting screen”
appears.
2
Highlight the item to
store or change
o
(Edit)
3 Enter the name to be
stored
You can enter up to 8 double-byte or 16 single-
byte characters.
4
Enter the numbers (prefix)
You can enter up to 10 digits.
Prefix setting screen (P.61)/IDD
Prefix setting screen (P.55)
Edit
……
Edits the prefix number or IDD prefix code.
Delete this
*1
…… Deletes one prefix number.
Delete
*2
……
Deletes one IDD prefix code.
Delete all …… Deletes all prefix numbers or IDD prefix
code.
*1: Available only with the Prefix setting screen.
*2: Available only with the IDD prefix setting screen.
Making a call with the Prefix numbers
<Prefix numbers>
z
You can add the prefix numbers from the “Enter
phone number screen” and the detail screens of
“Phonebook/Received calls/Dialed calls/Redial”
screens.
<Example: To make a voice call by adding prefix
numbers from the enter phone number screen>
1 Enter the phone number of the other
party
2
u
(FUNC) “Prefix numbers” Select
the stored name
r
Setting Sub-addresses When
Making Calls
<Sub-address setting>
You can set whether to specify “
*
” in the phone
number as a separator so that the numbers following
“
*
” are recognized as a sub-address (ON/OFF).
z
Sub-addresses are used in ISDN to identify calls
made from specific communications devices and to
select content in “V-live”.
1
i
“SETTINGS” “Dialing” “Sub-
address setting” “ON” or “OFF”
Setting the Alarm Used for
Reconnection
<Reconnect signal>
When the signal quality deteriorates during a voice/
videophone call and the call drops out, the FOMA
terminal will automatically reconnect the call if the
signal quality quickly improves. Set the type of alarm
when a call is reconnected for this function.
z
The interval for reconnection varies depending on
communication conditions or the signal quality. It
takes about 10 seconds.
1
i
“SETTINGS” “Talk” “Reconnect
signal” Select an alarm tone
Select from “No tone/High tone/Low tone”.
N
z
Some phones may be unable to receive push signals.
Prefix setting
Function menu P.61
N
z
In the following cases, “
*
” does not function as a sub-
address separator. The entered number including “
*
”
is recognized as an ordinary phone number:
• When the “
*
” is entered at the beginning of a
phone number
• When “
*
” immediately follows “186”/“184” at the
beginning of a phone number
• When “
*
” immediately follows a number entered
using “Prefix numbers”
• When the phone number contains “
*
590#/
*
591#/
*
592#”