NTT docomo FOMA N706i, Instruction Manual

Page: 475 / 519

22
8
Confirm the Access point (APN) on "
接続先（
APN
）の選択
" (Select the
access point (APN)) and click "
次へ
" (Next)
To specify advanced settings (TCP/IP settings)
Clicking " 詳細情報の設定 " (Detailed settings) displays the setup screen for "IP address" and
"Name server". If they must be input as the provider or corporate LAN information, follow the input
information directions and enter the addresses.
9
Specify a user ID and password,
select the accessible user and
click "
次へ " (Next)
When " すべてのユーザー " (All users) is
selected in the "
使用可能ユーザーの選択
"
(Selecting accessible user) column, the
connection setting is applied to all the users
registered in Windows.
When setting the user ID and password, input
the correct, case-sensitive data provided by the
service provider.
For Windows Vista
Specify the user ID and password and click
"
次へ
" (Next)
Proceed to Step 12.
10
Check " 最適化を行う " (Optimize the setting) and click " 次へ " (Next)
Optimize the communication settings of a PC to use FOMA packet communication. If they are already
optimized, this step is not neccessary so you can proceed to Step 12.
11
Click "
はい
" (Yes) on the "HIGH-SPEED
対応端末の確認
" (Confirmation for
HIGH-SPEED phone) screen
12
Check the setting information and
click "
完了 " (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking "
デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click "
戻る " (Back).
13
Click "OK"
You need to restart the PC to enable the optimized settings. If the restart selection screen appears,
click "
はい
" (Yes).
Execute communication. → p.25