NTT docomo FOMA N706i, Instruction Manual

Page: 237 / 519

235
1Seg
Before Using 1Seg
● View procedure
■
When a call, etc. arrives while watching
When one of the following arrives while watching or
recording, video and audio are interrupted and each
function activates.
Watching can be resumed after each function is
finished.
• Voice call
• Videophone call
• Alarm, Schedule, To Do, booked program (When
“Alarm setting” is set to “Alarm preferred”)
Setting Channels
<Channel setting>
To use 1Seg, set channels and select a channel list
beforehand. Register a channel list for each area.
Selecting the channel list allows you to watch local
channels.
z
Up to 10 channel lists can be registered, each of
which can contain up to 50 broadcast stations.
z
Receivable channels vary depending on the area.
Registering channel lists
1
i
“1SEG” “Channel setting”
“Select area”
■ To search for channels automatically and
register a channel list
“Auto channel setting” “YES” “YES” Enter
title
To interrupt search, press
o
(Cancel) or
t
then select “YES”.
2
Select area Select prefecture “YES”
N
z
1Seg programs cannot be viewed if FOMA card (UIM)
is not inserted, subscription to DOCOMO is canceled,
or FOMA service usage is stopped.
z
Even if subscribed FOMA card (UIM) is inserted, 1Seg
may not be activated, e.g. if 1Seg programs are
watched repeatedly out of FOMA range. In this case,
move into FOMA range and retry activation.
z
Do not activate in the following situations when
watching 1Seg programs for the first time:
• Out of FOMA range
• Self mode activating
z
Prolonged 1Seg watching while charging may shorten
battery life.
■ Important
z
When changing models or repairing, stored data
(video clips/pictures recorded with 1Seg, TV link,
data stored in storage area, etc.) cannot be
transferred. Keep a separate record just in case. A
microSD card is available to store videos.
Step 1 Channel setting
→
P.235
Register a channel list for each area, then selecting
the channel list.
Step 2 Watching 1Seg Programs
→ P.236
N
z
“Select area” may not work properly depending on the
area. In this case, use “Auto channel setting”.
z
Perform “Auto channel setting” in digital terrestrial
broadcast range where the radio wave can be
received.
z
The message that notify you the remote control
number is duplicated may appear in “Auto channel
setting”. In this case, select area manually.