NPM PPCI7443, User Manual

Page: 21 / 183

Installation
•
13
2.9 CN5 Pin Assignment : TTL Output
The signals on CN5 are for general-purposed TTL output signals.
2.10 Jumper Setting for Pulse Output
The J1~J8 is used to set the signal type of the pulse output signals (DIR
and OUT). The output signal type could be differential line driver output or
open collector output. Please refer to section 3.1 for details of the jumper
setting. The default setting is the differential line driver mode.
Line Driver
Open Collector
Line Driver
Open Collector
Pin No. Name Function
1 DGND Digital ground
2 DGND Digital ground
3 ED0 Digital Output 0
4 ED1 Digital Output 1
5 ED2 Digital Output 2
6 ED3 Digital Output 3
7 ED4 Digital Output 4
8 ED5 Digital Output 5
9 VCC VCC +5V
10 N.C. No use
1
2
3
J5 J6 J7 J8
J1 J2 J3 J4
1
2
3