NDR-HB4208, NDR-HB4416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
64
RECORDER’S MENU
RECORDER’S OPERATION
4.4. Active Cameo Mode
You can enter the Active Cameo mode by selecting Edit Group from the Live Monitoring – Camera
menu or pressing and holding the CAMEO button for three seconds or longer in any multi-view format.
The yellow outline surrounding the video indicates the active cameo, and pressing the arrow buttons
moves the active cameo. Pressing the
(Play/Pause) button exits the Active Cameo mode. Selecting
Exit Group Edit in the cameo menu displayed when pressing the CAMEO button also exits the Active
Cameo mode. The active cameo mode will remains in effect for 15 seconds if there is no further
operation.
In active cameo mode, press the button for the camera you want to display in the active cameo. After
setting the camera number to active cameo, the DVR moves the active cameo to the next cameo. When
the camera number exists on the current screen, the active cameo is changed with the existing camera
number. When the camera number does not exist on the current screen, the active cameo is replaced by
the camera number. You can change the screen layout in this way.
4.5. Zoom Mode
You can enlarge an area of the video by pressing the ZOOM button. For a few seconds after pressing the
ZOOM button, a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You
can move the rectangle around using the arrow buttons. Pressing the
(Play/Pause) button in the
Zoom mode enlarges the area in rectangle. Exit the Zoom mode by pressing the ZOOM button. While
in the Zoom mode, the icon
displays if Zoom is selected in the Display setup screen (OSD tab).
4.6. PTZ Mode
If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The
DVR will control cameras with Pan, Tilt and Zoom capabilities. Press and hold the PTZ button to
display the PTZ camera menu and enter the PTZ mode, and press the button again to exit the PTZ mode.
Select the PTZ camera you wish to control by selecting it from the menu. The icon
displays on the
PTZ camera screen.
To use the front panel buttons, press the Left and Right arrow buttons to pan left and right. Press the Up
and Down arrow buttons to tilt the camera up and down. Press the
button to zoom in, and press the
button to zoom out. You can use the
and
buttons to focus the image.
You can establish preset positions for PTZ cameras. Press the
to establish Presets.
You can quickly move PTZ cameras to Preset positions. Press the
to view an established camera
Preset position.
You can save camera position settings as “presets” so that you can go directly to desired views.
Once you have the camera at the desired settings, press the
button, and the Set Preset dialog box will
appear. Select the number you want to assign to the preset and press the
button. Use the virtual
keyboard to enter the preset name.
Press the
button to load the PTZ preset and the Move to Preset dialog box will appear. Select the
desired preset and press the
button to load the preset.
