NDR-HB4208, NDR-HB4416 User’s manual ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
62
RECORDER’S MENU
RECORDER’S OPERATION
Display
Full Screen:
Selecting
(Display) →
(Full Screen) and choosing the camera number button displays the
selected camera full screen. Clicking the left mouse button on the screen again returns to the
previous display mode.
PIP, 2x2, 1+5, 1+7, 3x3, 4x4
(1+7 and 4x4 only in NDR-HB4416)
:
Selecting
(Display) →
,
,
,
,
or
(PIP, 2x2, 1+5, 1+7, 3x3 or 4x4) displays
the
cameras in the selected multiview screen mode.
NOTE:
In the 1+5 or 1+7 display mode, the main channel indicates the channel displayed on the
large screen which is displayed in the top-left. You can select the camera you want to
display on the main channel screen. Select a channel on the screen and click the right
mouse button to display the Camera Menu. Selecting
Go To Main
swaps the selected channel
with the main channel.
Camera OSD, Status OSD:
Selecting
(Display) → Camera OSD or Status OSD toggles Camera OSD or Status OSD On
and Off.
Previous Group, Next Group
Selecting or (Previous Group or Next Group) in the Live Monitoring menu moves to the previous
or next page. It is the same as pressing the GROUP button.
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you
select again. It is the same as pressing the (Play/Pause) button. Pressing any button except for the
MENU, ALARM and PANIC buttons while in the Freeze mode can also exit the Freeze mode. While
in the Freeze mode, the icon displays in bottom-left corner if Freeze is selected in the Display setup
screen (OSD tab).
Alarm
Selecting (Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer
during an alarm. It is the same as pressing the ALARM button.
Panic
Selecting (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting
again stops panic recording. It is the same as pressing the PANIC button.
Search
Selecting (Search) → All Channels exits the live monitoring mode and enters the search mode.
Selecting (Search) → Triplex enters the Triplex mode. Selecting the camera number plays back video
of the selected camera.
Setup
Selecting (Setup) in the Live Monitoring menu enters the Main Setup screen.
Status
Selecting (Status) in the Live Monitoring menu allows you to check the status of the DVR’s system,
inputs and storage.
