Novell ZENworks Network Access Control 5.0, User Manual

Page: 278 / 534

278 Novell ZENworks Network Access Control Users Guide
no
vd
ocx
(e
n)
24
Ma
rch 20
09
ProCurve Access Point 530(radio1)#enable
ProCurve Access Point 530(radio1)#radio 2
ProCurve Access Point 530(radio2)#enable
ProCurve Access Point 530(config)#write mem
ProCurve Access Point 530(config)#exit
HP ProCurve 3400/3500/5400
radius-server host 10.60.1.3 key hpsecret
aaa accounting network start-stop radius
aaa authentication port-access eap-radius
aaa port-access authenticator 1-8
aaa port-access authenticator 1-8 auth-vid 100
aaa port-access authenticator 1-8 unauth-vid 101
aaa port-access authenticator active
Nortel
®
5510
NOTE: When the Nortel switch is used in unstacked mode, a range of ports is defined as 1-24.
When the Nortel switch is used in stacked mode, a range of ports is defined as 1/1-24; <unit>/<port-
port>. See the Nortel switch user manuals for more information.
RADIUS Server setup:
radius-server host 10.0.0.5
radius-server secondary-host 0.0.0.0
radius-server port 1812
! radius-server key ********
Enable 802.1X:
eapol enable
interface FastEthernet ALL
eapol port 1-2 status auto traffic-control in-out re-authentication enable re-a
uthentication-period 3600 re-authenticate quiet-interval 60 transmit-interval 3
0 supplicant-timeout 30 server-timeout 30 max-request 2
Vlan Info:
vlan create 10 name "production" type port
vlan create 11 name "guest" type port
vlan create 12 name "quarantine" type port
! *** EAP ***
!
eapol enable
interface FastEthernet ALL
eapol port 1-2 status auto traffic-control in-out re-authentication enable re-
authentication-period 3600 re-authenticate quiet-interval 60 transmit-interval 3 0
supplicant-timeout 30 server-timeout 30 max-request 2