manualshive.com logo in svg

Novell ZENworks Network Access Control 5.0, User Manual, Page: 483 / 534

Share
Download
Novell ZENworks Network Access Control 5.0 User Manual Download Page 483

Licenses

483

no

vd

ocx 

(e

n)

  

24

 Ma
rch 20

09

3. All advertising materials mentioning features or use of this software must display the following 
acknowledgment: "This product includes software developed by the OpenSSL Project for use in the 
OpenSSL Toolkit. (

http://www.openssl.org/  (http://www.openssl.org/)

)"

*

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote 
products derived from this software without prior written permission. For written permission, please 
contact [email protected].

*

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in 
their names without prior written permission of the OpenSSL Project.

*

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This 
product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (

http:/

/www.openssl.org/ (http://www.openssl.org/)

 )"

*

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY 
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

* ========================================================== *

This product includes cryptographic software written by Eric Young

([email protected]). This product includes software written by Tim

Hudson ([email protected]).

Original SSLeay License

-----------------------

/* Copyright (C) 1995-1998 Eric Young ([email protected])

* All rights reserved.

*

This package is an SSL implementation written by Eric Young ([email protected]). The 
implementation was written so as to conform with Netscapes SSL.

*

Summary of Contents for ZENworks Network Access Control 5.0























































































































































































































































































































































































































































































































































Reviews:

No comments