Novell ZENworks Network Access Control 5.0 User Manual Download Page 59

Page: 59 / 534

System Configuration

ocx

Ma
rch 20

Enter the following information:

User ID

— The user ID used to log into Novell ZENworks Network Access Control

Password

— The password used to log into Novell ZENworks Network Access Control

Full name

— The name associated with the user account

Email address

— The email address used for notifications

Select an Account status:

enabled

— This status allows an account to log into the user interface

disabled

— This status prevents an account from logging into the user interface

In the

User roles

area, select one of the following default roles for the user account: (See

Section 3.7, “User Roles,” on page 63

for more information about user roles and permissions

associated with user roles.)

Cluster Administrator

View-Only User

System Administrator

Help Desk Technician

You can select a custom user role if you have created any.

NOTE:

Users must be assigned at least one role.

In the

Clusters

area, select a cluster or clusters.

Summary of Contents for ZENworks Network Access Control 5.0























































































































































































































































































































































































































































































































































Novell ZENworks Network Access Control 5.0, User Manual, Page: 59 / 534

Search results

Summary of Contents for ZENworks Network Access Control 5.0

Reviews: